Close

Categories

Filters

    Rhizopon Stekpoeder 0,25% 20g

    € 8,95 39 In stock Available in store: Check availability

    Available in store

    Close
    Rhizopon Chryzotop Green 0.25% is a ready-to-use cutting powder containing 0.25% 3-Indolylbutyric acid. Chryzotop is a means to promote root formation in cuttings.... Show more

    Product description

    Rhizopon Chryzotop Green 0.25% is a ready-to-use cutting powder containing 0.25% 3-Indolylbutyric acid. Chryzotop is a means to promote root formation in cuttings.

    In plant buds, plant hormones or growth regulators (auxins) are produced under the influence of light and heat; they are transported to that part of the plant, where the roots are or should be. Therefore, in summer the production of these hormones is better than in winter. The best chance of rooting the cuttings is therefore from April to July. Outside this period, the success of rooted cuttings is more difficult and often depends on the weather. By adding external growth agents - rooting agent, which is popularly known as cutting agent - to the cuttings, the rooting of the cuttings can be helped better and faster.

    As a rule, the active substance in the cutting powder is 3-Indolylbutyric acid with a content of 0.25% to 1%. Due to its composition, powder has a slow-release effect, which often gives better results than a wet or tablet-based adhesive.

    The use of Rhizopon powders
    A pre-treatment with a growth-containing powder is one of the most used methods for rooting of cuttings simultaneously and uniformly. Rhizopon powders have a slow-release effect, the so-called 'slow release effect', because of their composition, which can yield a better result than a variety of crops. Thanks to this delayed effect, a powder treatment is also ideal for cuttings that need to be transported or stored in a cold store for some time.

    Evenly distributed
    When working with Rhizopon cutting powder, it is important to ensure that the powder is evenly distributed over the base of the cutting. Otherwise, the cuttings could root unevenly if the powder was not applied correctly. It is also necessary to prevent the powder from coming into contact with leaves or other plant parts. This can cause damage.

    Powder dip
    Treatment of the cuttings with powder is simple and easy. The cuttings, individually or per bundle, are dipped with the base into the powder concentration to be used. The depth with which the cuttings are dipped determines the height to which root growth can be expected. The cuttings will start to root all over the powdered stem surface. After dipping the cuttings, the excess powder is tapped off, so that the base of each cutting is evenly powder coated all around. In some applications, such as marching, the powder can also be applied to the area to be treated with a clean brush.

    Powder Dip / Spray Method
    A combination of powder dip and spraying method is a possible solution for crops that root hard and slowly, where the uniformity leaves something to be desired. First the cuttings are dipped in powder and then stung. Then a solution with Rhizopon AA tablets is dripped over the cuttings until dripping. Click here for more information.

    Instructions

    • When working with Chryzotop, care should be taken to ensure that the powder is evenly spread over the cutting base in a thin layer, otherwise the cutting may become more densely rooted in some places;
    • To prevent damage, the cutting powder must not come into contact with leaves or other plant parts;
    • Do not spill the cutting powder on the potting soil either;
    • The cuttings are usually dipped individually with the base into the powder concentration to be used;
    • To do this, put a little bit of cutting powder on a saucer. Insert the cutting 1 to 2 cm into the powder. If the powder does not adhere sufficiently to the base of a cut cutting, lightly moisten the cutting base first. The cuttings will start to form roots over the entire powdered stem surface;
    • After removing the cutting (s) from the powder, the excess powder is shaken off (tapped off), so that the base of each cutting is evenly powder coated all around. Shearing / accumulation of the powder is prevented by first piercing a hole in the potting soil with a thin stick and placing the cutting in it.

    Always wash your hands after cutting and avoid contact of powder with food.

    Keep
    Plant growths should not be left in a warm and damp room. Storage should be in sealed packaging in a cool dry place and in the dark.

    Show more

    Specifications

    Article number
    UGS0720

    Show more

    Reviews

    5 from 5Based on 1 reviews
    Create your own review
    5 from 5
    Prima produkt.
    Posted by: Hans Vreesman on 19 July 2021
    Rhizopon Stekpoeder 0,25% 20g
    € 8,95
    Rhizopon Stekpoeder 0,25% 20g
    20gr
    39 In stock
    Add to cart

    Recently viewed

    Compare 0

    Add another product (max. 5)

    Start comparison