Available in storeClose
- Whatsappen over dit product? Klik hier
- Binnen 14 dagen retourneren
- Klantbeoordeling: 9,3 van 10
- Voor 15.00 besteld = morgen in huis
Available in storeClose
Aptus Regulator is a booster that can be used throughout the cycle and it supports both the growth and the flowering phase. By adding the regulator of Aptus, the plant becomes stronger, thicker and has better resistance to stress.
Nutrients are better absorbed and the dry matter content is increased by compact growth. By using Aptus Regulator, the plant can also withstand extreme conditions and the regulator ensures undisturbed growth and flowering and thus also an optimal yield.
Advantages of Aptus Regulator
Tips & Tricks
Always add the Aptus Regulator first in the nutrient tank when it is completely filled with clean water. With the Aptus Regulator, the plant remains compact. The distance between the branches (internodes) becomes very regular. If plants are in danger of becoming too large, the growth in height can be inhibited with higher dosing of the Regulator. With the Regulator, plants can handle much higher temperatures. Up to 40 ° C, the plant simply continues to grow and bloom green. Regulator increases the dry matter content, which in turn provides a few percent advantage when drying! Prepare a barrel with Regulator within 3 days.
Aptus Regulator consists of a mix of trace elements with the main element being silica. The silicic acid hardens the cell wall resulting in thicker stems, firmer leaves and ultimately a stronger plant. Because more fibers are produced, the plant also contains more dry matter. And silicic acid controls the absorption of important nutrients such as nitrogen (N), phosphorus (P) and potassium (K). The Regulator is available in 250ml, 500ml, 1000ml and 5000ml packaging.
The Regulator is a super concentrated product. A small dose is sufficient for a great effect. Use 15 ml per 100 liters of water (1: 6666) throughout the cultivation cycle. Due to the high concentration and low dosage, the Regulator is cheap to use. Always mix the Regulator first for the feed and any boosters in clean water in the feed vessel. Keep stirring or pumping around so that the Regulator dissolves completely. Then continue to prepare the nutrient tank. Never pre-mix the Regulator (for example in a measuring cup) and make sure that no dirt enters the bottle.